Find 14k Gold Bautizo Three Tone Gold Charm 0 8 at Amazon
|
You might wonder why you may never get your old jewellery to shine like new, or you might wonder why the $15 silver item in a market has not one thing like the finish that you see on a $120 item in a jewellery shop. Well let me take you speedily through the procedure that I do to finish of my pieces of jewellery. Firstly, an item comes back from the casting procedure and it has a good deal of pieces of metal hanging off it and the finish is all crinkly or it looks like it has been sandblasted. Here are the steps I take: 1. I use a heavy file and remove all the dags or sharp bits of metal left over from casting. 2. I next use a light metal file and I file the item as smooth as I can. I likewise use round files and square files and triangular files to get into those hard to get places. 3. Next I use respective grades of sandpaper starting with a medium grit and sanding all over the items. Then I use a finer grade to sand all over again. 4. Now I place the items in a tumbler of metal shot. It is a mixture of little ball bearings and pointy pieces of stainless steel. It is tumbled in this with a solution of water and polish. I leave it tumbling for assorted hours. 5. I now use string with polish on it to get into holes and crevices where my other tools can not reach. I run the string through the holes and polish the inside of them. This takes a lot of time and I am not fond of doing it. 6. I now use a mechanical polisher with a grease called Tripoli which genuinely comes from Tripoli and I use this to polish the item. 7. Now I put this into an ultrasonic machine with a solution of hot water and detergent to clean the Tripoli polish from the item. 8. Now I use another polish on the machine called Rouge. It is a red polish and now this will give my item a high gleam. 9. Back into the ultrasonic for regarding twenty minutes and the rouge is removed. I then arid the item cautiously with a soft cloth. 10. Finally I get a polish impregnated cloth and I hand polish the item for a splendid sparkling finish. That’s all there is to it! I now slip the item into a jewellery box without touching it with my fingers. Sometimes I’ll wear a glove for this as I do not want my finger marks on the item. Now if you have been wearing your wedding ring 24/7 for ten years and you take it off and try to polish it by hand you’ll know why you’ll never catch up to me.
|
